Skip to main content Skip to page footer

Power Supply NT24V/2,5A-S

The Power Supply is used for the operating voltage supply of the ISYGLT BUS components.

Quick Facts

  1. max. 2.5A
  2. compact Power Supply for small systems
  3. supplies the operating voltage for the BUS modules
  4. primary switched controller

The Power Supply is used for the operating voltage supply of the ISYGLT BUS components. When dimensioning the Power Supply, the maximum current values of the individual modules must be added. This is very easy to calculate via the parts list in the ProgramDesigner after the modules have been created.

Electrical Data

Operating voltage (primary) 230V AC +/-10% 48/63Hz
Output voltage 24-28V DC adjustable, tolerance +/-3%
Output current 2.5A short-circuit proof, electronically protected
current limitation 3.1A
short-circuit current 3.5A
Efficiency ratio 85-90%
Minimum load 0mA
Residual ripple 35mVss
No-load power loss 0.9W
Connection screw terminals 2.5mm²
Operating temperature -10...+50°C
Storage temperature -25...+70°C
Humidity 0...90 % r.h. non-condensing
Protection class in non-installed state IP20

Design, Dimensions, Weight

Design DIN rail-mounting plastic housing light grey, snap-on on 35mm DIN rail 4 HP
Dimensions 72x93x68mm
Weight 350g

Changed design from fall 2024

Design DIN rail-mounting plastic housing light grey, snap-on on 35mm DIN rail 3 HP
Dimensions 54x95x69mm
Weight 210g

Ordering Data and Conformity

Type designation NT24V/2,5A-S
Article no. 80030025
Make ISYGLT
Conformity CE

Pin Assignment

2-pole terminal below left

230V Mains voltage 230V (L)
230V Mains voltage 230V (N)

4-pole terminal below right

24V DC - Output 0V
24V DC - Output 0V
24V DC + Output +24V
24V DC + Output +24V

New Sale
NT-24V-2_5A_4TE_bild72.jpg

NT24V/2,5A-S

Article no.: 80030025

The Power Supply Unit is used to supply the ISYGLT BUS components with operating voltage.