LED Dimmer with 3 independent constant current outputs, CC 350mA, for noise sensitive applications, dimming 0-100% high resolution, monochrome coloured or also circadian/HCL (Human Centric Lighting warm white / cold white).

The Actuator Module is used for wireless control of DALI lights with the ISYGLT system. DALI control types such as DT6 and DT8 broadcast and group control, HCL, RGB, RGBW and Tunable White are possible.

Multifunctional white 7" touch control panel with full-surface reflection-minimised glass front in brushed stainless steel desk housing with rounded corners.

DALI module with 2 separate DALI lines for controlling up to 2x 64 DALI luminaires in max. 2x 16 dimming groups. Supports luminaire types DT6 and DT8.

A robust leading edge dimmer for dimming resistive and inductive loads. In addition to lamps, motors, welding equipment and heaters can also be controlled. The dimmer has many control options, emergency functions and adjustable parameters.

1-channel LED Dimmer constant voltage for 24V up to maximum 10A

I/O module with 4 optocoupler inputs 230V and 4 relay outputs 230V/16A with manual actuation lever. Various parameterizable special functions.

I/O module with 2 binary inputs and 2 relay outputs for 2 light circuits. Luminaire terminal device designed especially for installation into a luminaire.

The BUS Light Control Sensor is used for the exact control of artificial light and daylight. The measured light spectrum corresponds to the lux value V-Lambda curve V(λ). It is available with and without integrated motion sensor and can also control according to presence. It is mounted on the ceiling as standard, the sensor measures the reflection of the surface below.

The Wind Sensor is used to detect the horizontal wind speed. We recommend this sensor for protection against too high wind speeds when controlling awnings, outside blinds etc. The data is transferred to the ISYGLT Master via the WSM-01E module.

With the DMX module the two worlds of building services engineering and stage technology (theatre technology) can be connected. Depending on the application, the ISYGLT DMX512-16B module can be used as DMX master, DMX slave, DMX/ISYGLT merger or DMX repeater (booster). Of course combinations of these applications are also possible.

LED Dimmer with 2 outputs for current-controlled LEDs with a constant current of 700mA each. Dimming 0-100% high resolution, monochrome coloured or also circadian/HCL (Human Centric Lighting warm white / cold white).

The 4-fold Universal Dimmer is suitable for all common dimmable types of illuminants. There are 4 separate dimmer inputs and outputs available. The control circuits automatically detect the connected load and switch from trailing edge to leading edge technology accordingly.

The outstanding technology in terms of active power factor correction (PFC) and inrush current surge regulation makes these power supplies the ideal supply for the most sensitive LED lightings.

Multifunction Time Relay, output contacts: 3x change-over contact 8A

Multifunctional 5" touch control panel with full-surface reflection-minimised black glass front for mounting on a flush-mounted switch box.

LED Dimmer with 3 independent constant current outputs, CC 350mA. Dimming 0-100% high resolution, monochrome coloured or also circadian/HCL (Human Centric Lighting warm white / cold white).

The 4-fold Universal Dimmer is suitable for all common dimmable types of illuminants. There are 4 separate dimmer inputs and outputs available. The control circuits automatically detect the connected load and switch from trailing edge to leading edge technology accordingly.

Multifunctional black 7" touch control panel with full-surface reflection-minimised glass front in black stainless steel desk housing with rounded corners.

DALI module with 2 separate DALI lines for controlling up to 2x 64 DALI luminaires in max. 2x 16 dimming groups. Supports luminaire types DT6 and DT8 and has 2 additional RJ45 network interfaces.

A robust leading edge dimmer for dimming resistive and inductive loads. In addition to lamps, motors, welding equipment and heaters can also be controlled. The dimmer has many control options, emergency functions and adjustable parameters.

DALI module for controlling lamps with DSI or DALI ballasts in broadcast. 4 independently dimmable DSI/DALI outputs are available.

I/O module with 4 binary inputs and 4 relay outputs. For control tasks that are switched with 230V.

With the module up to 2 commands can be transferred to the BUS system and 2 commands can be issued.

The calibratable Light Sensor for the ISYGLT system can be used as an outdoor Light Sensor, twilight switch or as a lux meter for monitoring and controlling indoors.

The Weather Combi Sensor is used to measure the meteorological parameters precipitation, wind speed and brightness in east, south and west direction. Via the WSM-01E module the data are transmitted to the ISYGLT Master.

The Power Supply Unit is used to supply the ISYGLT BUS components with operating voltage.

24V LED Dimmer for 1-10V or pushbutton control with one channel for 15A/360W. Dimming 0-100% high-resolution.

The varintens MDK-ES-10 is a digital Multifunctional Control Unit that can be controlled in different ways on the one hand and can be used to control different loads on the other.

The outstanding technology in terms of active power factor correction (PFC) and inrush current surge regulation makes these power supplies the ideal supply for the most sensitive LED lightings.

Multifunction Time Relay, output contacts: 1x change-over contact 16A

LED Dimmer with 4 independent constant current outputs, CC 200mA. Dimming 0-100% high resolution, monochrome coloured or also circadian/HCL (Human Centric Lighting warm white / cold white).