The parameterisation module is used to enter 4 setpoints with a value range of 0-100% (0-255). The setpoints are set for each channel using a separate potentiometer integrated in the module. The resolution of each channel is 8 bits. The individual analog channels are available in the Master Module for further links, depending on the application purpose.
| Operating voltage | 12V-35V DC or 12V-27V AC |
| Current consumption | 45mA at 12V, 25mA at 24V |
| Subnet (RS-485) | max. 5.6V limitation by Z-diodes |
| Connection | screw terminals pluggable |
| Operating temperature | -10...+50°C |
| Storage temperature | -25...+70°C |
| Protection class | IP30 |
8-pole DIP switch for setting the ISYGLT BUS address (0-127) is located under the cover of the module.
| DIP-1 | Setting |
|---|---|
| OFF | Data transmission rate 38400 Baud |
| ON | Data transmission rate 9600 Baud |
| LED | Designation | State | Meaning |
|---|---|---|---|
| red | Power | Off | No operating voltage |
| On | Operating voltage, no error | ||
| yellow | BUS | Off / On | Error BUS |
| blinking | Interference-free data transmission via the BUS line |
Article no.: 80027205
