The TS-U1 Button Interface is used for coupling application modules or button sensors to the ISYGLT-BUS. With the coupler, the LevySidus button sensor attachments, for example, can be easily operated in the ISYGLT-BUS with the full range of functions. We can also offer you button sensors from LevySidus. If you need couplers for button sensors of other manufacturers, please contact us specifically.
| Operating voltage | 12V-35V DC, 12V-27V AC |
| Current consumption | 25mA at 24V (5 LEDs on) |
| Subnet (RS-485) | max. 5.6V limitation by Z-diodes |
| Connection | Screw terminals 2.5mm² for BUS |
| Dimensions | LxWxH 72x72x24mm |
| Operating temperature | -10°C to +50°C |
| Storage temperature | -25°C to +70°C |
| Humidity | 0-85 % r.h. non-condensing |
| Protection class | IP 00 |
8-pole DIP switch for setting the ISYGLT BUS address (0-127) is located on the back of the module.
| LED | Designation | State | Meaning |
|---|---|---|---|
| yellow | BUS | Off | No operating voltage |
| On | Operating voltage | ||
| blinking | Interference-free data transmission via the BUS line | ||
| fast blinking | No parameters in the module |
In the ISYGLT ProgramDesigner there are various parameterisation possibilities:
Article no.: 80023210
The TS-U1 Button Interface is used to connect application modules or pushbutton sensors to the ISYGLT BUS.
