Article no.: 80027500
The DMX module can be used to connect the two worlds of building technology and stage technology (theatre technology). The ISYGLT DMX512-16B-V2 module can be used as DMX Master, DMX Slave, DMX/ISYGLT Merger or DMX Repeater (Booster) depending on the application. Of course, combinations of these applications are also possible.
The DMX module can be used to connect the two worlds of building technology and stage technology (theatre technology). The ISYGLT DMX512-16B-V2 module can be used as DMX Master, DMX Slave, DMX/ISYGLT Merger or DMX Repeater (Booster) depending on the application. Of course, combinations of these applications are also possible.
The DMX module can be used to connect the two worlds of building technology and stage technology (theatre technology). The basic philosophy of the DMX BUS consists of a Master (usually control desk) and several slaves (dimmer, scanner, colour changer...). The DMX BUS is physically designed for 32 participants. If more participants are connected, a Repeater or Booster must also be planned.
As the name DMX-512 implies, up to 512 channels (8 bit values) can be transmitted. The required number of channels depends on the connected device. Dimmers need one DMX channel per dimmer channel. Scanners or washlights require one channel per function (X, Y, zoom, shutter, colour, gobos, iris, effects...). If several Masters are to be operated at one DMX BUS, a merger is required. This merger combines two or more DMX-512 Masters (DMX-IN) to a common DMX BUS (DMX-OUT). The higher level per channel is passed on here.
The ISYGLT DMX512-16B-V2 module can be used as DMX Master, DMX Slave, DMX/ISYGLT Merger or DMX Repeater (Booster) depending on the application. Of course, combinations of these applications are also possible.
New 8/2016, Version "V2"
The 16 dimming channels of ISYGLT can now be output to up to 256 DMX addresses. This was developed especially for light installations with many DMX terminals. In the hall mode the control is done by ISYGLT in grouped areas and in the show mode the single channels can also be accessed via a Merger, e.g. as a pixel matrix.
Applications
The DMX512-16B module occupies 6 module addresses (4x DA-04 and 2x AD-08T) in the Master. The address of the first "DA-04" module is set at the DIP switch.
| Type designation | DMX512-16B-V2 |
| Article no. | 80027500 |
| Operating voltage | 12V to 35V DC or 12V to 27V AC |
| Current consumption | 70mA at 24V |
| DMX-IN |
GND, DATA-, DATA+ (DMX 1990) GND DMX-IN is galvanically connected with GND DMX-OUT |
| DMX-OUT |
GND, DATA-, DATA+ (DMX 1990) GND DMX-IN is galvanically connected with GND DMX-OUT |
| Subnet (RS-485) | max. 5.6V limitation by Z-diodes |
| Connection | screw terminals 1.5mm² pluggable |
| Operating temperature | -10...+60°C |
| Storage temperature | -25...+70°C |
| Humidity | 0...85 % r. h. non-condensing |
| Protection class | IP 20 |
| Protection class | II |
| Design | DIN rail-mounting plastic housing light grey, snap-on on 35mm DIN rail 3 HP |
| Dimensions | WxHxD 53x90x59mm |
| Weight | 120g |
| Brand | ISYGLT |
| Compliance | CE |
| LED | Designation | State | Meaning |
|---|---|---|---|
| red | Power | Off | No operating voltage |
| On | Operating voltage, no error | ||
| yellow | BUS | Off | BUS wiring error |
| On | Error BUS communication (address) | ||
| blinking | Interference-free data transmission via the BUS line | ||
| green | DMX-IN | Off | No DMX signal is received |
| Fast blinking | Reception of a valid DMX-512 signal (the LED is toggled each time the receive packet is started) |
The DMX module can be used to connect the two worlds of building technology and stage technology (theatre technology). The basic philosophy of the DMX BUS consists of a Master (usually control desk) and several slaves (dimmer, scanner, colour changer...). The DMX BUS is physically designed for 32 participants. If more participants are connected, a Repeater or Booster must also be planned.
As the name DMX-512 implies, up to 512 channels (8 bit values) can be transmitted. The required number of channels depends on the connected device. Dimmers need one DMX channel per dimmer channel. Scanners or washlights require one channel per function (X, Y, zoom, shutter, colour, gobos, iris, effects...). If several Masters are to be operated at one DMX BUS, a merger is required. This merger combines two or more DMX-512 Masters (DMX-IN) to a common DMX BUS (DMX-OUT). The higher level per channel is passed on here.
The ISYGLT DMX512-16B-V2 module can be used as DMX Master, DMX Slave, DMX/ISYGLT Merger or DMX Repeater (Booster) depending on the application. Of course, combinations of these applications are also possible.
New 8/2016, Version "V2"
The 16 dimming channels of ISYGLT can now be output to up to 256 DMX addresses. This was developed especially for light installations with many DMX terminals. In the hall mode the control is done by ISYGLT in grouped areas and in the show mode the single channels can also be accessed via a Merger, e.g. as a pixel matrix.
Applications
The DMX512-16B module occupies 6 module addresses (4x DA-04 and 2x AD-08T) in the Master. The address of the first "DA-04" module is set at the DIP switch.
| Type designation | DMX512-16B-V2 |
| Article no. | 80027500 |
| Operating voltage | 12V to 35V DC or 12V to 27V AC |
| Current consumption | 70mA at 24V |
| DMX-IN |
GND, DATA-, DATA+ (DMX 1990) GND DMX-IN is galvanically connected with GND DMX-OUT |
| DMX-OUT |
GND, DATA-, DATA+ (DMX 1990) GND DMX-IN is galvanically connected with GND DMX-OUT |
| Subnet (RS-485) | max. 5.6V limitation by Z-diodes |
| Connection | screw terminals 1.5mm² pluggable |
| Operating temperature | -10...+60°C |
| Storage temperature | -25...+70°C |
| Humidity | 0...85 % r. h. non-condensing |
| Protection class | IP 20 |
| Protection class | II |
| Design | DIN rail-mounting plastic housing light grey, snap-on on 35mm DIN rail 3 HP |
| Dimensions | WxHxD 53x90x59mm |
| Weight | 120g |
| Brand | ISYGLT |
| Compliance | CE |
| Type designation | DMX512-16B-V2 |
| Article no. | 80027500 |
| Operating voltage | 12V to 35V DC or 12V to 27V AC |
| Current consumption | 70mA at 24V |
| DMX-IN |
GND, DATA-, DATA+ (DMX 1990) GND DMX-IN is galvanically connected with GND DMX-OUT |
| DMX-OUT |
GND, DATA-, DATA+ (DMX 1990) GND DMX-IN is galvanically connected with GND DMX-OUT |
| Subnet (RS-485) | max. 5.6V limitation by Z-diodes |
| Connection | screw terminals 1.5mm² pluggable |
| Operating temperature | -10...+60°C |
| Storage temperature | -25...+70°C |
| Humidity | 0...85 % r. h. non-condensing |
| Protection class | IP 20 |
| Protection class | II |
| Design | DIN rail-mounting plastic housing light grey, snap-on on 35mm DIN rail 3 HP |
| Dimensions | WxHxD 53x90x59mm |
| Weight | 120g |
| Brand | ISYGLT |
| Compliance | CE |
| LED | Designation | State | Meaning |
|---|---|---|---|
| red | Power | Off | No operating voltage |
| On | Operating voltage, no error | ||
| yellow | BUS | Off | BUS wiring error |
| On | Error BUS communication (address) | ||
| blinking | Interference-free data transmission via the BUS line | ||
| green | DMX-IN | Off | No DMX signal is received |
| Fast blinking | Reception of a valid DMX-512 signal (the LED is toggled each time the receive packet is started) |
| LED | Designation | State | Meaning |
|---|---|---|---|
| red | Power | Off | No operating voltage |
| On | Operating voltage, no error | ||
| yellow | BUS | Off | BUS wiring error |
| On | Error BUS communication (address) | ||
| blinking | Interference-free data transmission via the BUS line | ||
| green | DMX-IN | Off | No DMX signal is received |
| Fast blinking | Reception of a valid DMX-512 signal (the LED is toggled each time the receive packet is started) |
