Article no.: 80024080
kostenlose Anfrage / free request
from 1 € 0.00 € 0.00
The IN-08T provides up to 8 inputs in a very compact design. The 8-way Input Module fits perfectly into switch boxes or continuous line luminaires and has all terminals for pushbuttons or Motion Sensors (e.g. BW-03) already included. Thus a fast clean installation is possible.
The IN-08T module provides 8 digital inputs in a very compact design for the connection of 24V Motion Sensors, conventional pushbuttons, switches and contacts. These inputs are transferred to the BUS system and the functions can be freely defined via system programming.
Due to its very small design of 30x45x15mm, the BUS module fits perfectly into switch boxes, terminal boxes or continuous line luminaires. For each input there are also +24V and 0V connections for 0.6...0.8mm wires available (e.g. for 24V Motion Sensors), so normally no additional terminals have to be squeezed into the boxes.
The features of the module can be individually adapted via the programming software ProgramDesigner. If the desired function is not available in the factory setting of the hardware, it is very easy to change e.g. the inputs from normally open to normally closed function. In addition, adaptations to connected sensors are possible, which may only be queried after a delay after the first switch-on. This is supplemented by a function with switch-off delay and a so-called Motion Sensor mode. This also allows adjustments to be made for programming room monitoring and alarm detectors.
Example functions: Ceiling light swarm formation, light on/off, dimming, window contact monitoring, blinds up/down, room monitoring and much more.
|Operating voltage||24V DC|
|Inputs||12-27V DC, 5mA via optocoupler|
|Subnet (RS-485)||max. 5.6V limitation by Z-diodes|
|Connection||screw terminals 1.5mm² for Ub and BUS, inputs plug-in terminals max. 0.8mm²|
|Humidity||0...85 % r.h. non-condensing|
|Protection class||IP 30|
|red||POWER||Off||No operating voltage|
|On||Operating voltage, no error|
|yellow||BUS||Off / On||Error BUS|
|blinking||Interference-free data transmission via the BUS line|
The ISYGLT ProgramDesigner offers a wide range of parameterisation options:
|0V (4x)||0V for Motion Sensors|
|+24V (4x)||+24V for inputs or Motion Sensors|
Article no.: 80024080