With the I/O Panel Module I/O-08T-24V 8 buttons and 8 signal lamps can be connected to the ISYGLT BUS system. 8 relay outputs max. 48V/300mA are available as outputs and 8 optocoupler inputs 12-48V as inputs, each on a common counter potential. The functions of all inputs and outputs are freely programmable via the software.
| Operating voltage | 12V to 35V DC or 12V to 27V AC |
| Current consumption |
12V DC = 180mA, 24V DC = 80mA, 35V DC = 55mA 12V AC = 105mA, 24V AC = 70mA, 27V AC = 65mA (all relays energized in each case) |
| Inputs | 12-48V AC/DC, input current per input 5mA at 24V; Ue max. 48V |
| Outputs | max. 48V/300mA per output |
| Subnet (RS-485) | max. 5.6V limitation by Z-diodes |
| Connection | screw terminals 1.0mm², or post plug for flat ribbon cable |
| Operating temperature | -10...+50°C |
| Storage temperature | -25...+70°C |
| Humidity | 0...85 % r.h. non-condensing |
| Protection class | in non-installed state IP00 |
| LED | Designation | State | Meaning |
|---|---|---|---|
| red | POWER | Off | No operating voltage |
| On | Operating voltage, no error | ||
| yellow | BUS | Off / On | Error BUS |
| blinking | Interference-free data transmission via the BUS line |
| B | Subnet (BUS B, RS-485) |
| B | Subnet (BUS B, RS-485) |
| A | Subnet (BUS A, RS-485) |
| A | Subnet (BUS A, RS-485) |
| 0V | Operating voltage 0V |
| 0V | Operating voltage 0V |
| Ub | Operating voltage |
| Ub | Operating voltage |
| A8 | Output 8 |
| A7 | Output 7 |
| A6 | Output 6 |
| A5 | Output 5 |
| A4 | Output 4 |
| A3 | Output 3 |
| A2 | Output 2 |
| A1 | Output 1 |
Article no.: 80021100
