The I/O Panel Module I/O-08T-PNP can be used to connect 8 buttons and 8 signal lamps to the ISYGLT BUS system. 8 short-circuit-proof PNP transistor outputs are available as outputs and 8 optocoupler inputs 12-48V each on a common counter potential are available as inputs. The functions of all inputs and outputs are freely programmable via the software.
| Operating voltage | 12V to 35V DC or 12V to 27V AC |
| Current consumption |
12V DC = 25mA, 24V DC = 25mA, 35V DC = 25mA 12V AC = 30mA, 24V AC = 30mA, 27V AC = 30mA |
| Inputs | 24V DC, (potential free contact) input current per input 5mA at 24V |
| Outputs | PNP transistor, max. 50mA per output (+Ub -1V) |
| Subnet (RS-485) | max. 5.6V limitation by Z-diodes |
| Connection | screw terminals 1.0mm², or post plug for flat ribbon cable |
| Operating temperature | -10...+50°C |
| Storage temperature | -25...+70°C |
| Humidity | 0...85 % r.h. non-condensing |
| Protection class | when not installed IP00 |
| LED | Designation | State | Meaning |
|---|---|---|---|
| red | POWER | Off | No operating voltage |
| On | Operating voltage, no error | ||
| yellow | BUS | Off / On | Error BUS |
| blinking | Interference-free data transmission via the BUS line |
| Ub | Operating voltage |
| Ub | Operating voltage |
| 0V | Operating voltage 0V |
| 0V | Operating voltage 0V |
| A | Subnet (BUS A, RS-485) |
| A | Subnet (BUS A, RS-485) |
| B | Subnet (BUS B, RS-485) |
| B | Subnet (BUS B, RS-485) |
Article no.: 80021150
