Skip to main content Skip to page footer
ISYGLT ISYGLT
0 € 0.00
Products
Product
Qty
Price
Shipping
€ 0.00
Total
€ 0.00
Products

Digital IN Module IN-02U-S4

Flush-mounted Input Module for connecting conventional pushbuttons and switches to the subnet. The module can be used to transfer 2 commands to the BUS system. This module offers the possibility of subaddress management.

Quick Facts

  1. 2 digital inputs
  2. Subaddress management
  3. Connecting standard buttons
  4. Evaluation of presence sensors
  5. Systems with many addresses in one subnet

Function Indicators (LEDs on the Module)

LEDDesignationStateMeaning
redPowerOffNo operating voltage
OnOperating voltage, no error
yellowBUSOffError BUS
blinkingInterference-free data transmission via the BUS line

Pin Assignment

4-pole connector

=Ub Operating voltage
0V 0V Operating voltage
A BUS A (subnet RS-485)
B BUS B (subnet RS-485)

3-pole wire connector

White Input 1
Brown Input 2
Red COM.A (+Ub-1V)

DIP switch

8-pole DIP switch for setting the ISYGLT BUS address (0-127) is located on the module.

Special function DIP switches 9 and 10

SubaddressDIP-9 DIP-10Corresponds in the program to the outputs
0OFFOFFE**.1E**.2
1OFFONE**.3E**.4
2ONOFFE**.5E**.6
3ONONE**.7E**.8

Each four of these modules share one module address.

The flush-mounted IN Module is used to connect conventional pushbuttons and switches to the subnet. With the module 2 independent commands can be transferred to the BUS system. The buttons/switches are connected by means of wires. The difference to the standard IN-02U Module lies in the possibility of subaddress management. With this it is possible that four IN-02U-S4 Modules share one address.

Ordering Data and Conformity

Type designation IN-02U-S4
Article no. 80024024
Make ISYGLT
Conformity CE

Electrical Data

Operating voltage 12-27V DC or 12-27V AC
Current consumption 5mA at 24V DC
Inputs 2x 12-30V DC, 5mA (potential-free contact) via optocoupler (4.7kOhm)
Subnet (RS-485) max. 5.6V limitation by Z-diodes
Connection screw terminals 2.5mm² for BUS, solid wires 0.8mm for inputs
Operating temperature -10°C to +50°C
Storage temperature -25°C to +70°C
Humidity 0...85 % r.h. non-condensing
Protection class IP 20

Design, Dimensions, Weight

Design encapsulated in yellow plastic cap for installation in commercially available flush-mounted boxes or third-party devices
Dimensions DxH 50x18mm
Weight approx. 90g
New Sale
IN-02U-s4_bild722.jpg

IN-02U-S4

Article no.: 80024024

Flush-mounted input module for connecting conventional pushbuttons and switches to the subnet. With this module 2 commands can be transferred to the BUS system. This module offers the possibility of sub address management.