Digital IN Module IN-02UC

No longer in production - remaining stocks on request!

Flush-mounted Input Module for connecting conventional pushbuttons and switches to the subnet. The module can be used to transfer 2 commands to the BUS system.

Quick Facts

  • 2 digital inputs
  • Connecting standard buttons/switches
  • Very compact design

The flush-mounted IN Module is used to connect conventional pushbuttons and switches to the subnet. With the very compact module, 2 commands can be transferred to the BUS system. The buttons/switches are connected by means of pre-assembled wires. 

Electrical Data

Operating voltage 12-27V DC
Current consumption 15mA
Inputs 2x potential-free contact, max. cable length 20cm
Subnet (RS-485) max. 5.6V limitation by Z-diodes
Connection screw terminals 2.5mm² for BUS, solid wires 0.8mm for inputs
Operating temperature -10°C to +50°C
Storage temperature -25°C to +70°C
Humidity 0...85 % r.h. non-condensing
Protection class IP 20

Design, Dimensions, Weight

Design encapsulated in black plastic housing for installation in commercially available flush-mounted boxes or third-party devices
Dimensions LxWxH 28x28x18mm
Weight approx. 90g

Ordering Data and Conformity

Type designation IN-02UC
Article no. 80024022
Make ISYGLT
Conformity CE

Tender Documents

Instruction Manuals

Wiring Diagrams

DIP switch

8-pole DIP switch for setting the ISYGLT BUS address (0-127) is located on the module.

Special function DIP switch 1

DIP-1 Setting
OFFData transmission rate 38400 Baud
ONData transmission rate 9600 Baud

Function Indicators (LEDs on the Module)

LEDDesignationStateMeaning
yellowBUSOffError BUS
blinkingInterference-free data transmission via the BUS line

Pin Assignment

4-pole connector

=Ub Operating voltage
0V 0V Operating voltage
A BUS A (subnet RS-485)
B BUS B (subnet RS-485)

3-pole wire connector

White Input 1
Brown Input 2
Grey COM (GND)
IN-02UC_bild72.jpg

IN-02UC

Article no.: 80024022

Flush-mounted input module for coupling conventional pushbuttons and switches to the subnet. With this module 2 commands can be transferred to the BUS system.
+ shipping costs
  • kostenlose Anfrage / free request
    from 1 € 0.00 € 0.00

This website uses cookies

We use cookies to personalise content and ads, provide social media features and analyse traffic to our website. We also share information about your use of our website with our social media, advertising and analytics partners. Our partners may combine this information with other data that you have provided to them or that they have collected in the course of your use of the Services. You give consent to our cookies when you continue to use our website.

Cookie optin by Olli machts