Digital I/O Module I/O-02U-5V

No longer in production - remaining stocks on request!

Flush-mounted input module for connecting third-party devices with an operating voltage of 5V to the subnet. With this module 2 commands can be transferred to the BUS system and 2 messages can be issued.

Quick Facts

  • 2 outputs 24V
  • 2 inputs
  • BUS coupler and 5V supply for external devices

The flush-mounted I/O Module is used to connect third-party devices such as Motion Sensors with an operating voltage of 5V to the subnet. The regulated operating voltage of +5V is provided by the I/O Module. The module can be used to transfer 2 commands to the BUS system and to issue 2 messages.

Electrical Data

Operating voltage 12-27V DC
Current consumption 20-120mA depending on output load
Inputs 2x 12-30V DC, 5mA (potential-free contact) via optocoupler (4.7kOhm)
Outputs 2x +Ub -1V, max. 20mA via OC outputs
Subnet (RS-485) max. 5.6V limitation by Z-diodes
Reference voltage +5V max. 15mA for supply of third-party devices
Connection screw terminals 2.5mm²
Operating temperature -10°C to +50°C
Storage temperature -25°C to +70°C
Humidity 0...85 % r.h. non-condensing
Protection class IP 20

Design, Dimensions, Weight

Design encapsulated in yellow plastic cap for installation in commercially available flush-mounted boxes or third-party devices
Dimensions DxH 50x18mm
Weight 90g

Ordering Data and Conformity

Type designation I/O-02U-5V
Article no. 80024010
Make ISYGLT
Conformity CE

Tender Documents

Instruction Manuals

Wiring Diagrams

DIP switch

8-pole DIP switch for setting the ISYGLT BUS address (0-127) is located on the module.

Special function DIP switch 1

DIP-1 Setting
OFFData transmission rate 38400 Baud
ONData transmission rate 9600 Baud

Function Indicators (LEDs on the Module)

LEDDesignationStateMeaning
redPowerOffNo operating voltage
OnOperating voltage, no error
yellowBUSOff / OnError BUS
blinkingInterference-free data transmission via the BUS line

Pin Assignment

4-pole connector

=Ub Operating voltage
0V 0V Operating voltage
A BUS A (subnet RS-485)
B BUS B (subnet RS-485)

7-pole wire connector

Yellow Reference voltage output +5V
Grey GND Reference voltage
Pink Digital output 1
Blue Digital output 2
Violet Digital input 2
Black Digital input 1
Red COM (+) digital outputs (+Ub -1V)
IO-02U-5V_bild72.png

I/O-02U-5V

Article no.: 80024010

Flush-mounted input module for coupling external devices with an operating voltage of 5V to the subnet. With this module 2 commands can be transferred to the BUS system and 2 signals can be output.
+ shipping costs
  • kostenlose Anfrage / free request
    from 1 € 0.00 € 0.00

This website uses cookies

We use cookies to personalise content and ads, provide social media features and analyse traffic to our website. We also share information about your use of our website with our social media, advertising and analytics partners. Our partners may combine this information with other data that you have provided to them or that they have collected in the course of your use of the Services. You give consent to our cookies when you continue to use our website.

Cookie optin by Olli machts