Article no.: 80011171
The freely programmable Master Module is the central controller (CPU) of the ISYGLT BUS system. The MA-IP-2 is the centerpiece for control tasks in buildings. Universally suitable for lighting control, SmartHome, building automation, HVAC control, sanitary control, and much more.
The Master Module controls the data traffic on the ISYGLT BUS and is required once per subnet.
The function programming of all peripheral modules connected to the subnet BUS (switching modules, analog modules, button modules, dimming modules) is carried out with the ProgramDesigner.
The program memory in the Master can be written to as often as required. The stored data is safely retained even in the event of an operating voltage failure.
The serial interface "Backbone" is used for data exchange between several Masters.
Possible time sources:
The following functions are possible with the TCP/IP interface:
| Type designation | MA-IP-2 |
| Article no. | 80011171 |
| Operating voltage | 12V to 35V DC or 12V to 27V AC |
| Current consumption | 24V DC; 100mA |
| Interface SUBNET | RS-485 for the ISYGLT subnet BUS for communication with modules |
| Interface PROGRAM | RS-232 programming interface for connection of PC / modem |
| Interface BACKBONE | RS-485 potential-free for the ISYGLT Backbone BUS for networking several Master Modules |
| Interface SETUP | RS-232 for IP Master setup |
| Interface RJ45 | Ethernet TCP/IP interface |
| Program memory |
24kByte program memory (not expandable) 32kByte (RAM) Data memory EEPROM-buffered, non-volatile 8KByte optionally expandable to 32 KByte (EEPROM), for light scenes, non-volatile 2MB RAM for IP Master 16MB Data memory for IP Master Web Server: 200 pages with 8 controls each, additional 500kB for simple HTML pages Mail server: Sending 16 e-mails to 16 different recipients Fault message processing: 128 messages, 4000 memory locations |
| Connection | screw terminals pluggable max. 1.5mm² and P-COM connector |
| Operating temperature | -10°C...+50°C |
| Storage temperature | -25°C...+70°C |
| Humidity | 0...85 % r. h. non-condensing |
| Protection class | IP 30 |
| Design | DIN rail-mounting plastic housing light grey, snap-on on 35mm DIN rail 6 HP |
| Dimensions | WxHxD 107.6 x 89.7 x 60.7mm |
| Weight | 157g |
| Brand | ISYGLT |
| Compliance | CE |
| LED | Designation | State | Meaning |
|---|---|---|---|
| green | IPM READY | Off | IP functions not ready for operation |
| On | IP functions ready for operation | ||
| red | POWER | Off | No operating voltage |
| On | Operating voltage, no error | ||
| yellow | SUBNET | Off / On | Error BUS |
| flashing | Interference-free data transmission via the BUS line | ||
| green | RUN-STAT | Off | System is not running |
| Steady flashing | System ok but no time received | ||
| 2x short flashing followed by a break | System ok and time received | ||
| red | PROGRAM | Off | No program transmission |
| On | Program is transferred (from PC / modem) | ||
| yellow | BACKBONE | Off / On | Error backbone / backbone inactive |
| flashing | Interference-free data transmission on the backbone BUS |
The Master Module controls the data traffic on the ISYGLT BUS and is required once per subnet.
The function programming of all peripheral modules connected to the subnet BUS (switching modules, analog modules, button modules, dimming modules) is carried out with the ProgramDesigner.
The program memory in the Master can be written to as often as required. The stored data is safely retained even in the event of an operating voltage failure.
The serial interface "Backbone" is used for data exchange between several Masters.
Possible time sources:
The following functions are possible with the TCP/IP interface:
| Type designation | MA-IP-2 |
| Article no. | 80011171 |
| Operating voltage | 12V to 35V DC or 12V to 27V AC |
| Current consumption | 24V DC; 100mA |
| Interface SUBNET | RS-485 for the ISYGLT subnet BUS for communication with modules |
| Interface PROGRAM | RS-232 programming interface for connection of PC / modem |
| Interface BACKBONE | RS-485 potential-free for the ISYGLT Backbone BUS for networking several Master Modules |
| Interface SETUP | RS-232 for IP Master setup |
| Interface RJ45 | Ethernet TCP/IP interface |
| Program memory |
24kByte program memory (not expandable) 32kByte (RAM) Data memory EEPROM-buffered, non-volatile 8KByte optionally expandable to 32 KByte (EEPROM), for light scenes, non-volatile 2MB RAM for IP Master 16MB Data memory for IP Master Web Server: 200 pages with 8 controls each, additional 500kB for simple HTML pages Mail server: Sending 16 e-mails to 16 different recipients Fault message processing: 128 messages, 4000 memory locations |
| Connection | screw terminals pluggable max. 1.5mm² and P-COM connector |
| Operating temperature | -10°C...+50°C |
| Storage temperature | -25°C...+70°C |
| Humidity | 0...85 % r. h. non-condensing |
| Protection class | IP 30 |
| Design | DIN rail-mounting plastic housing light grey, snap-on on 35mm DIN rail 6 HP |
| Dimensions | WxHxD 107.6 x 89.7 x 60.7mm |
| Weight | 157g |
| Brand | ISYGLT |
| Compliance | CE |
| Type designation | MA-IP-2 |
| Article no. | 80011171 |
| Operating voltage | 12V to 35V DC or 12V to 27V AC |
| Current consumption | 24V DC; 100mA |
| Interface SUBNET | RS-485 for the ISYGLT subnet BUS for communication with modules |
| Interface PROGRAM | RS-232 programming interface for connection of PC / modem |
| Interface BACKBONE | RS-485 potential-free for the ISYGLT Backbone BUS for networking several Master Modules |
| Interface SETUP | RS-232 for IP Master setup |
| Interface RJ45 | Ethernet TCP/IP interface |
| Program memory |
24kByte program memory (not expandable) 32kByte (RAM) Data memory EEPROM-buffered, non-volatile 8KByte optionally expandable to 32 KByte (EEPROM), for light scenes, non-volatile 2MB RAM for IP Master 16MB Data memory for IP Master Web Server: 200 pages with 8 controls each, additional 500kB for simple HTML pages Mail server: Sending 16 e-mails to 16 different recipients Fault message processing: 128 messages, 4000 memory locations |
| Connection | screw terminals pluggable max. 1.5mm² and P-COM connector |
| Operating temperature | -10°C...+50°C |
| Storage temperature | -25°C...+70°C |
| Humidity | 0...85 % r. h. non-condensing |
| Protection class | IP 30 |
| Design | DIN rail-mounting plastic housing light grey, snap-on on 35mm DIN rail 6 HP |
| Dimensions | WxHxD 107.6 x 89.7 x 60.7mm |
| Weight | 157g |
| Brand | ISYGLT |
| Compliance | CE |
| LED | Designation | State | Meaning |
|---|---|---|---|
| green | IPM READY | Off | IP functions not ready for operation |
| On | IP functions ready for operation | ||
| red | POWER | Off | No operating voltage |
| On | Operating voltage, no error | ||
| yellow | SUBNET | Off / On | Error BUS |
| flashing | Interference-free data transmission via the BUS line | ||
| green | RUN-STAT | Off | System is not running |
| Steady flashing | System ok but no time received | ||
| 2x short flashing followed by a break | System ok and time received | ||
| red | PROGRAM | Off | No program transmission |
| On | Program is transferred (from PC / modem) | ||
| yellow | BACKBONE | Off / On | Error backbone / backbone inactive |
| flashing | Interference-free data transmission on the backbone BUS |
| LED | Designation | State | Meaning |
|---|---|---|---|
| green | IPM READY | Off | IP functions not ready for operation |
| On | IP functions ready for operation | ||
| red | POWER | Off | No operating voltage |
| On | Operating voltage, no error | ||
| yellow | SUBNET | Off / On | Error BUS |
| flashing | Interference-free data transmission via the BUS line | ||
| green | RUN-STAT | Off | System is not running |
| Steady flashing | System ok but no time received | ||
| 2x short flashing followed by a break | System ok and time received | ||
| red | PROGRAM | Off | No program transmission |
| On | Program is transferred (from PC / modem) | ||
| yellow | BACKBONE | Off / On | Error backbone / backbone inactive |
| flashing | Interference-free data transmission on the backbone BUS |
