ISYGLT Sensors

The BUS Light Control Sensor is used for the exact control of artificial light and daylight. The measured light spectrum corresponds to the lux value V-Lambda curve V(λ). It is available with and without integrated motion sensor and can also control according to presence. It is mounted on the ceiling as standard, the sensor measures the reflection of the surface below.

The calibratable Light Sensor for the ISYGLT system can be used as an outdoor Light Sensor, twilight switch or as a lux meter for monitoring and controlling indoors.

The calibratable Light Colour/Brightness Sensor for the ISYGLT system can be used as an outdoor or indoor light sensor. Many different curves and value queries are available to use the sensor for a wide range of applications. A special application is the regulation of light exactly to the desired light colour, e.g. in offices, schools, industry (e.g. control room) or museums. Due to the direct measurement, daylight is also included. Another interesting application for biologically effective lighting control is the measurement of outside light and the transfer of the exact value to the indoor.

Small digital Combi Sensor for light, movement and presence. The Motion Sensor works with HF technology and consists of 4 internal, separately adjustable sensor units. The 16-bit Light Sensor measures the visible spectrum (V-lambda) and is perfectly suited for exact daylight-dependent control.

BUS combi-sensor for light, motion, presence in a small mini design for a wide range of installation options. The PIR motion sensor is perfect for detecting presence and motion in workplaces or small to medium-sized rooms. An integrated 16-bit light sensor measures the visible spectrum (V-lambda) of light and is perfect for daylight-dependent control.

The digital Light Sensor with PIR Motion Sensor in mini design is suitable for implementing daylight controls, regulations and switching thresholds indoors.

Digital Light Sensor with passive infrared Motion Sensor (Long Distance Detection) as loose printed circuit board without housing.

Digital Light Sensor with passive infrared Motion Sensor (Long Distance Detection) installed in grey surface-mounted plastic housing.

Digital Light Sensor with passive infrared Motion Sensor (Long Distance Detection) installed in surface-mounted housing GIRA System 55.

Digital Light Sensor with passive infrared Motion Sensor (Long Distance Detection) installed in flush-mounted cover and frame GIRA System 55.

Digital Light Sensor with passive infrared Motion Sensor (High Density Long Distance Detection) as loose printed circuit board without housing.

Digital Light Sensor with passive infrared Motion Sensor (High Density Long Distance Detection) installed in grey surface-mounted plastic housing.

Digital Light Sensor with passive infrared Motion Sensor (High Density Long Distance Detection) installed in surface-mounted housing GIRA System 55.

Digital Light Sensor with passive infrared Motion Sensor (High Density Long Distance Detection) installed in flush-mounted cover and frame GIRA System 55.

The Mini Motion Sensor detects even the smallest movements and is suitable for many applications with motion or presence detection with a range of between 0.5m and 5m. The BW-02 requires 24V and has an output which issues the motion pulses. Optimal function is guaranteed by connecting it to a binary input of an I/O module.

The Mini Motion Sensor is suitable for many applications with motion detection between 2m and 10m. The BW-03 requires 24V and has an output which issues the motion pulses. Optimum function is guaranteed by connecting it to a binary input of an I/O module.

The detection range of the Mini Motion Sensor is optimized for high rooms up to 12.5m. The BW-06 requires 24V and has an output which issues the motion pulses. Optimum function is guaranteed by connecting it to a binary input of an I/O module.

The BW-07 PIR Motion Sensor is ideally suited for narrow long areas such as hallways or corridors. Due to the integrated line amplifier, the length of the control line up to the I/O module or 24V power component can be up to 100m.

The Wall Presence Sensor detects even the smallest movements and is ideally suited for installation in corridors and rooms with a range of up to 20m. The Presence Sensor requires 24V and has an output which issues the motion pulses. Optimum function is guaranteed by connecting it to a binary input of an I/O module.

The high quality Weather Station WETTER-01 is especially suitable for Smart Home systems and smaller buildings, which need many different weather data in one compact device. Via the WSM-02E-RS485 module, the data is transmitted to the ISYGLT Master.

The Weather Sensor Module was developed especially for connecting the Weather Station WETTER-01.

The Wind Direction Sensor is used to detect the horizontal wind direction. Via the WSM-01E module, the data is transmitted to the ISYGLT Master.

The Wind Sensor is used to detect the horizontal wind speed. We recommend this sensor for protection against too high wind speeds when controlling awnings, outside blinds etc. The data is transferred to the ISYGLT Master via the WSM-01E module.

The Precipitation Monitor can be used to determine the beginning and end of precipitation, as well as the duration of precipitation periods. We recommend this sensor, for example, for the control of roof windows or similar applications where damage due to precipitation can occur. Via the WSM-01E module, the data are transmitted to the ISYGLT Master.

The Weather Combi Sensor is used to measure the meteorological parameters precipitation, wind speed and brightness in east, south and west direction. Via the WSM-01E module the data are transmitted to the ISYGLT Master.

The Weather Sensor Module was specially developed for the Weather Sensors available in the ISYGLT product range.

The small digital room air sensor is used to assess the air quality. The internal CO2 sensor measures the CO2 concentration and displays it visually via an LED signal light.

With the flush-mounted Temperature Module TEMP-02U, 2 temperature sensors can be read in.

The Temperature Sensor TF-A is designed for connection to the ISYGLT modules TEMP-02U or ER-04U.

The Temperature Sensor TF-E-02 is designed for connection to the ISYGLT modules TEMP-02U or ER-04U.

The Temperature Sensor TF-L is designed for connection to the ISYGLT modules TEMP-02U or ER-04U.

The Single-Room Temperature Controller ER-04U ensures temperature management for a wide range of room requirements.

The Single-Room Temperature Controller ER-01U-G1 ensures temperature management for a wide range of room requirements. The room controller is integrated in the operating unit.

The Temperature Module is used to connect PT1000 temperature sensors that are widely used on the market.