The LS-06-PIR-02-WH is a digital Light Sensor with Motion Sensor for indoor applications. The sensor is connected directly to the ISYGLT BUS. The Light Sensor provides a calibratable 16-bit brightness value. Daylight controls, regulation and switching thresholds can be realised with this light value. The measured spectrum corresponds to the standardised V-lambda curve (λ).
The PIR Motion Sensor is equipped with different detection lenses depending on the type. Up to 4 separately parameterisable sensitivity setups are available for evaluation. Thus, adjustments to customer requirements and local conditions are individually possible, such as activating the lighting only in the case of large movement or maintaining the „ON“ state even in the case of small movement detections.
| Operating voltage | 12-24V DC (max. 30V DC) |
| Current consumption | max. 10mA |
| Subnet (RS-485) | max. 5.6V limitation by Z-diodes |
| Measuring range illuminance | 0 to 4500 lx (depending on mounting) |
| PIR motion sensor |
Standard / Slight Motion Detection: 44° x 44° / 91° x 91° Typical mounting height: 3m Range: 2.2m - 3.1m Sensor EKMC2693111K |
| Connection | Mini-plug Molex 51021-0400, 4-pole cable to RJ10 incl. terminal adapter |
| Delivery scope | Sensor, 250mm connection cable, RJ10 adapter für cable cross-section 0.25-0.75mm² |
| Operating temperature ta | -20°C to +45°C |
| Storage temperature | -25°C to +70°C |
| Humidity | 0-90% r. h. non-condensing |
| Protection class | >IP20 |
Due to the design of the sensor, there is no space for the usual DIP switch for address setting. With this sensor, the address is set via software parameterisation with the ISYGLT ProgramDesigner.
Display and buttons at the sensor
| State | Meaning / Function | |
|---|---|---|
| LED red | slow blinking | Sensor has no address |
| fast blinking | Sensor is in programming mode | |
| Off | Sensor has a BUS address | |
| Individual | In BUS operation, the LED is freely programmable, e.g. movement active. | |
| Button right | Activation of the programming mode, actuation with small screwdriver or plastic, e.g. small cable tie | |
| Button left | Switching off the programming mode |
In the ProgramDesigner (from version 8.00.13.1002 R095), the sensor must be created as a module.
In addition, a virtual module „ISYGLT_ADR“ is required.
| Type | Article no. | Description |
|---|---|---|
| LS-06-PIR-01-WH | 80085071 | Compact housing white Low Profile Type Detection: 110°x110° Typical mounting height: 3m Range: up to 5m Sensor EKMC2607111K |
| LS-06-PIR-02-WH | 80085073 | Compact housing white Standard + Slight Motion Detection (Slight Motion): 44°x44° Detection (Standard Motion): 91°x91° Typical mounting height: 3m Range: 2.2m - 3.1m Sensor EKMC2693111K |
