Light and Motion Sensor LS-07-PIR-02-WH-AP

The digital Light Sensor with PIR Motion Sensor (Passive-Infrared) provides a calibratable 16-bit brightness value and is suitable for daylight controls, regulation and switching thresholds indoors.

Quick Facts

  • digital light sensor in surface-mounted plastic housing
  • PIR motion detection
  • up to 4 adjustable sensitivities
  • daylight controls, regulation and switching thresholds can be implemented

The LS-07-PIR-02-WH-AP is a digital Light Sensor with Motion Sensor for indoor applications. The sensor is connected directly to the ISYGLT BUS. The Light Sensor provides a calibratable 16-bit brightness value. Daylight controls, regulation and switching thresholds can be realised with this light value. The measured spectrum corresponds to the standardised V-lambda curve (λ).

The PIR Motion Sensor is equipped with different detection lenses depending on the type. Up to 4 separately parameterisable sensitivity setups are available for evaluation. Thus, adjustments to customer requirements and local conditions are individually possible, such as activating the lighting only in the case of large movement or maintaining the „ON“ state even in the case of small movement detections.

Electrical Data

Operating voltage 12-24V DC (max. 30V DC)
Current consumption max. 10mA
Subnet (RS-485) max. 5.6V limitation by Z-diodes
Measuring range illuminance 0 to 4500 lx (depending on mounting)
PIR motion sensor High Density Long Distance Detection Type
Detection: 69° x 69°
Typical mounting height: 12m
Range: 12m - 14.5m
Sensor EKMC2606111K
Connection Push-in terminals
Operating temperature ta -20°C to +45°C
Storage temperature -25°C to +70°C
Humidity 0-90% r. h. non-condensing
Protection class >IP20

Design, Dimensions, Weight

Design in surface-mounted plastic housing halogen-free grey
Dimensions LxWxH 80 x 82 x 56mm
Weight 160g

Ordering Data and Conformity

Type designation LS-07-PIR-02-WH-AP
Article no. 80085082-11
Make ISYGLT
Conformity CE

Tender Documents

Instruction Manuals

Technical Drawings

Wiring Diagrams

DIP Switch

8-pole DIP switch for setting the ISYGLT BUS address (0-127) is located on the circuit board of the module.

DIPFunction
S1Reserve (must be set to OFF)
S2 to S8ISYGLT module address

Function Indicators (LEDs on the Module)

LEDMeaning / Function
1x redFunction can be freely parameterised via the ProgramDesigner.

Software

Detection Range PIR Sensor

Pin Assignment

4-pole terminal

+ Operating voltage
- Operating voltage
A Subnet BUS A
B Subnet BUS B

Variants

Type designationArticle no.Description
LS-07-PIR-01-WH80085081Loose printed circuit board (PCB) without housing
Long Distance Detection Type
Detection area: 108° x 99°
Typical mounting height: 7m
Range: up to 12m
Sensor EKMC2603111K
LS-07-PIR-01-WH-AP80085081-11Sensor in surface-mounted plastic housing halogen-free grey
Long Distance Detection Type
Detection area: 108° x 99°
Typical mounting height: 7m
Range: up to 12m
Sensor EKMC2603111K
LS-07-PIR-01-WH-APG80085081-61Sensor in surface-mounted housing GIRA System 55
Long Distance Detection Type
Detection area: 108° x 99°
Typical mounting height: 7m
Range: up to 12m
Sensor EKMC2603111K
LS-07-PIR-01-WH-UP80085081-31Sensor in flush-mounted cover and frame GIRA System 55 pure white shiny
Long Distance Detection Type
Detection area: 108° x 99°
Typical mounting height: 7m
Range: up to 12m
Sensor EKMC2603111K
LS-07-PIR-02-WH80085082Loose printed circuit board (PCB) without housing
High Density Long Distance Detection Type
Detection area: 69° x 69°
Typical mounting height: 12m
Range: 12m - 14.5m
Sensor EKMC2606111K
LS-07-PIR-02-WH-AP80085082-11Sensor in surface-mounted plastic housing halogen-free grey
High Density Long Distance Detection Type
Detection area: 69° x 69°
Typical mounting height: 12m
Range: 12m - 14.5m
Sensor EKMC2606111K
LS-07-PIR-02-WH-APG80085082-61Sensor in surface-mounted housing GIRA System 55
High Density Long Distance Detection Type
Detection area: 69° x 69°
Typical mounting height: 12m
Range: 12m - 14.5m
Sensor EKMC2606111K
LS-07-PIR-02-WH-UP80085082-31Sensor in flush-mounted cover and frame GIRA System 55 pure white shiny
High Density Long Distance Detection Type
Detection area: 69° x 69°
Typical mounting height: 12m
Range: 12m - 14.5m
Sensor EKMC2606111K

Light and Motion Sensors

LS-07-PIR-02-WH-AP.jpg

LS-07-PIR-02-WH-AP

Article no.: 80085082-11

Digital Light Sensor with passive infrared Motion Sensor (High Density Long Distance Detection) installed in grey surface-mounted plastic housing.
+ shipping costs
  • kostenlose Anfrage / free request
    from 1 € 0.00 € 0.00
  • Click & Collect
    from 1 € 0.00 € 0.00
    Local pick-up
  • DHL
    from 1 € 0.00 € 5.90 Incl. 20.00% VAT
    Delivery within three days
  • DHL Express
    from 1 € 0.00 € 11.90 Incl. 20.00% VAT
    Delivery on the next day
  • Fedex
    from 1 € 0.00 € 6.90 Incl. 20.00% VAT
    Delivery within three days
  • TNT
    from 1 € 0.00 € 8.90 Incl. 20.00% VAT
    Delivery within three days

This website uses cookies

We use cookies to personalise content and ads, provide social media features and analyse traffic to our website. We also share information about your use of our website with our social media, advertising and analytics partners. Our partners may combine this information with other data that you have provided to them or that they have collected in the course of your use of the Services. You give consent to our cookies when you continue to use our website.

Cookie optin by Olli machts