Light Sensor with PIR LS-07-PIR-02-WH

The digital Light Sensor with PIR Motion Sensor (Passive-Infrared) provides a calibratable 16-bit brightness value and is suitable for daylight controls, regulation and switching thresholds indoors.

Quick Facts

  • digital light sensor
  • PIR motion detection
  • up to 4 adjustable sensitivities
  • daylight controls, regulation and switching thresholds can be implemented

The LS-07-PIR-02-WH is a digital Light Sensor with Motion Sensor for indoor applications. The sensor is connected directly to the ISYGLT BUS. The Light Sensor provides a calibratable 16-bit brightness value. Daylight controls, regulation and switching thresholds can be realised with this light value. The measured spectrum corresponds to the standardised V-lambda curve (λ).

The PIR Motion Sensor is equipped with different detection lenses depending on the type. Up to 4 separately parameterisable sensitivity setups are available for evaluation. Thus, adjustments to customer requirements and local conditions are individually possible, such as activating the lighting only in the case of large movement or maintaining the „ON“ state even in the case of small movement detections.

Electrical Data

Operating voltage 12-24V DC (max. 30V DC)
Current consumption max. 10mA
Subnet (RS-485) max. 5.6V limitation by Z-diodes
Measuring range illuminance 0 to 4500 lx (depending on mounting)
PIR motion sensor High Density Long Distance
69°x69°, max. 14.5m
Sensor EKMC2606111K
Connection Push-in terminals
Operating temperature ta -20°C to +45°C
Storage temperature -25°C to +70°C
Humidity 0-90% r. h. non-condensing
Protection class >IP20

Design, Dimensions, Weight

Design Light grey surface-mounted plastic housing (halogen-free) 80 x 82 x 56mm; other housing variants on request
Dimensions LxWxH 80 x 82 x 56mm
Weight 155g (with surface-mounted housing)

Ordering Data and Conformity

Type designation LS-07-PIR-02-WH
Article no. 80085082
Conformity CE

Tender Documents

Instruction Manuals

Wiring Diagrams

DIP Switch

8-pole DIP switch for setting the ISYGLT BUS address (0-127) is located on the circuit board of the module.

S1Reserve (must be set to OFF)
S2 to S8ISYGLT module address

Function Indicators (LEDs on the Module)

LEDMeaning / Function
1x redFunction can be freely parameterised via the ProgramDesigner.


Detection Range PIR Sensor

Pin Assignment

4-pole terminal

+ Operating voltage
- Operating voltage
A Subnet BUS A
B Subnet BUS B


TypeArticle no.Description
LS-07-PIR-01-WH80085081Surface-mounted housing light grey
Long Distance Detection
Detection 108°x99°, 12m
Sensor EKMC2603111K
LS-07-PIR-02-WH80085082Surface-mounted housing light grey
High Density Long Distance
Detection 69°x69°, max. 14.5m
Sensor EKMC2606111K


Flush-mounted version and other variants on request.



Article no.: 80085082

The digital Light Sensor with PIR Motion Sensor is suitable for implementing daylight controls, regulations and switching thresholds indoors.

+ shipping costs
  • kostenlose Anfrage / free request
    from 1 € 0.00 € 0.00 Incl. 0.00% VAT


0 reviews
Sort by:
Vendor response
More reviews