
The Wall Presence Sensor detects even the smallest movements and is ideally suited for installation in corridors and rooms with a range of up to 20m. The Presence Sensor requires 24V and has an output that outputs the movement impulses. Optimum function is guaranteed by connection to a binary input of an I/O Module.
The Wall Presence Sensor is ideally suited for installation in corridors and rooms.
The Presence Sensor reacts to the smallest movements by means of high-resolution and precise sensor technology. In addition to motion detection, the noise level in the room can also be used to extend the switch-off time after the delay time has elapsed.
In addition to lighting control, the ISYGLT BUS system can also be used to intelligently and reliably integrate energy-efficient functions such as heating and air conditioning. This guarantees a savings potential of up to 80%.
Connection and operation takes place directly at the digital inputs of the ISYGLT I/O Modules or IN Modules.
Sensor type PIR
Detection angle 180°
Range 10m at 2.20m mounting height
Mounting height 1.10m to 2.20m
Application areas
Light control and presence detection for medium-sized rooms/surfaces, e.g:
- corridors
- WC areas
- offices
- kindergardens
- hospitals
- garages
Electrical data
Operating voltage | 24V DC |
Current consumption | 100mA |
Power consumption | <1W |
Output | reed relay contact, max. 24V 100mA |
Connection | spring type terminal 5-pole 2x 0.25 - 0.75 mm² each |
Operating temperature | -25...+50°C |
Storage temperature | -25...+70°C |
Humidity | 0...85 % r.h. non-condensing |
Protection class | IP20 |
BW-WS-180-24V
Article no.: 80180001