The Power Supply is used for the operating voltage supply of the ISYGLT BUS components. When dimensioning the Power Supply, the maximum current values of the individual modules must be added. This is very easy to calculate via the parts list in the ProgrammDesigner after the modules have been created.
| Type designation | NT24V/6,25A-S |
| Article no. | 80030062 |
| Operating voltage (primary) | 230V AC +/-10%, 50-60Hz |
| Output voltage | 24V DC, tolerance +/-3% |
| Output current | 6.25A short-circuit proof, electronically protected |
| Minimum load | 0 mA |
| No-load power loss | 0.240 W |
| Residual ripple | 100 mVpp |
| Connection | Screw terminals 2.5mm² |
| Operating temperature | -20°C to +50°C |
| Storage temperature | -25°C to +70°C |
| Humidity | 5-90% r.h. non-condensing |
| Protection class | In non-installed state IP30 |
| Design | DIN rail-mounting plastic housing light grey, snap-on on 35mm DIN rail 4 HP |
| Dimensions | 72x93x68mm |
| Weight | 220g |
| Make | ISYGLT |
| Conformity | CE |
