Redundant Power Supply NT24V/2,5A-RED

Redundant System Power Supply for the operating voltage supply of the ISYGLT BUS components.

Quick Facts

  • output: 24V / 2.5A
  • N+1 redundancy
  • passive current distribution for parallel operation
  • integrated decoupling diode
  • DC-OK relay contact

The high-quality Redundant Power Supplies are required for systems where maximum reliability is prioritized. The device can be connected in parallel without additional components. This means that the BUS supply can be maintained even if one of the Power Supplies fails.

    Electrical Data

    Output voltage DC 24V
    Output current 2.5A
    Output power 60W
    Output ripple 30mVpp
    AC input voltage AC 100-120/220-240V (switchable)
    Mains frequency 50-60Hz
    AC input current < 0.7A (switch position 230V)
    AC inrush current typical < 25A at 264V AC and cold start
    Efficency ratio typical 86.5%
    Losses typical 9.4W
    Temperature range -10°C to +70°C
    Operation display 1 LED (DC OK)

    Design, Dimensions, Weight

    Design aluminium alloy housing, cover made of galvanised steel, mounting on 35mm DIN rail
    Dimensions WxHxD 49 x 124 x 102 mm
    Weight 470 g

    Ordering Data and Conformity

    Type designation NT24V/2,5A-RED
    Article no. 80030052
    Make PULS
    Conformity CE

    Instruction Manual / Data Sheet

    Additional Equipment

    • Angle for lateral mounting
    NT_24V_2,5A_RED_bild300.jpg

    NT24V/2,5A-RED

    Article no.: 80030052

    Redundant Power Supply Unit for the operating voltage supply of the ISYGLT BUS components.
    + shipping costs
    • kostenlose Anfrage / free request
      from 1 € 0.00 € 0.00