The flush-mounting Analog Module is used to read 2 separate analog values 0-5V into the subnet. The resolution of each channel is 8 bits. The individual analog channels are available in the Master Module for further links, depending on the application purpose. At the same time, 2 digital inputs and 2 digital outputs are available, at which e.g. buttons and signal lamps can be connected.
| Operating voltage | 12-30V DC |
| Current consumption | max. 20-80mA |
| Analog input voltage | 2 analog inputs with common GND 0-5V, 8 bit resolution, input resistance 47kOhm in series (input voltage 0-10V as special production possible or external via voltage divider 10kOhm + 10kOhm against ground) |
| Reference voltage output | 1 output 5V, output current max. 10mA short-circuit proof (common GND for analog inputs) |
| Digital outputs | +Ub -1V max. 20mA via OC |
| Digital inputs | 12-30V 5mA via optocoupler (4.7kOhm) |
| Subnet (RS-485) | max. 5.6V limitation by Z-diodes |
| Connection | screw terminals for BUS, wires 0.8mm for inputs/outputs |
| Operating temperature | -10...+50°C |
| Storage temperature | -25...+70°C |
| Humidity | 0...85 % r. h. non-condensing |
| Protection class | IP20 |
| DIP-1 | Setting |
|---|---|
| OFF | Data transmission rate 38400 Baud |
| ON | Data transmission rate 9600 Baud |
| LED | Designation | State | Meaning |
|---|---|---|---|
| red | Power | Off | No operating voltage |
| On | Operating voltage, no error | ||
| yellow | BUS | Off / On | Error BUS |
| blinking | Interference-free data transmission via the BUS line |
Article no.: 80027220
Analog input module (installation in flush-mounted box) with 2 analog inputs for reading 0-5V and 0-10V sensors. At the same time, 2 digital inputs and 2 digital outputs are also available to which, for example, buttons and signal lamps can be connected.
