The I/O module I/O-08B-230V-10A can be used to switch 8 circuits with a maximum of 230V/10A (2 contacts each on a common root). The phase position of the individual fuses is arbitrary. 8 optocoupler inputs 12-48V on a common counter potential are available as inputs. The functions of all inputs and outputs can be freely programmed via the software.
From production 2015, the modules will be available with the following parameterizable functions:
- Status of the output relays after Power ON
- Definition of inputs as currentless OFF or ON
- Definition of the functions of the BUS inputs
- Definition of the functions in the operating modes: BUS, BUS failure and emergency operation
- Safety functions for motor controls (limit switch settings, interlocks, activation times definable, switch-on times)
- Indication of defined pulse times on the relays
- Definition of the display LEDs on the module (display inputs or outputs, BUS error, operating mode, running light)
Electrical Data
| Operating voltage | 16V to 35V DC resp. 16V to 27V AC |
| Current consumption |
16V DC = 400mA, 24V DC = 250mA, 35V DC = 165mA 16V AC = 380mA, 24V AC = 220mA, 27V AC = 190mA (all relays energized) |
| Inputs | 8x 12-48V AC/DC, input current per input 5mA at 24V |
| Outputs |
8x relay contact 250V AC (DC max. 25V!) Load capacity: pure ohm's incandescent 10A fluorescent lamps uncompensated 6A fluorescent lamps compensated 4A low voltage halogen via transformer 10A phase motor 0.55kW ECGs depending on manufacturer, inrush current 100A < 20ms ! The inrush current of electronic ballasts is up to 100 times the rated current !! Minimum contact load: 500mW, min. 10V, min. 5mA |
| Subnet (RS-485) | max. 5.6V limitation by Z-diodes |
| Connection | screw terminals 2.5mm², inputs and BUS pluggable, BUS connector |
| Operating temperature | -10...+50°C |
| Storage temperature | -25...+70°C |
| Humidity | 0...85 % r.h. non-condensing |
| Degree of protection | in non-installed condition IP30 |
New
Sale
I/O-08B-230V-10A
Article no.: 80022000
I/O module with 8 binary inputs and 8 relay outputs. For control tasks that are switched with 230V.