Quick Facts
- up to 2 x 64 DALI participants
- supports DT6 and DT8
- group allocation freely parameterisable
- DALI broadcast for commissioning and emergency operation
- test and emergency operation option with ON/OFF button
- DALI-2 motion detector evaluation
- DALI-2 emergency lighting test and evaluation
- ECG addressing and checking in conjunction with the IP Master and the DALI Web Plugin
The DALI-64B-2X module is used to control electronic ballasts for LEDs that communicate using the DALI protocol. Up to 64 DALI ECGs (electronic ballasts) can be operated on each of the two DALI lines. Each of these 64 DALI devices must be programmed with a unique device address (DALI Short Address). Each device address can be controlled directly via value variables (flags) by parameterising the DALI-64B-2X module.
The module is equipped with its own mains supply. This enables a freely configurable emergency function for the corresponding DALI BUS. All DALI output devices are fully integrated into the possibilities of the ISYGLT system thanks to our concept. This means that the full range of functions of the ISYGLT system is available.
The module occupies 2 module addresses on the BUS.
With the DALI modules of the DALI-64B-2X series, a new DALI gateway concept has been realised that offers many more possibilities.
Functions:
- DALI broadcast
- DALI DT6, brightness, RGB (3xDT6), RGBW (4xDT6), HCL (2xDT6)
- DALI DT8, HCL, RGB, RGBW
- Optional
- DALI-2 motion sensors, evaluation of up to 16 motion sensors in 7 groups
- DALI-2 emergency lighting functionality with test functions, evaluation of results and errors - DALI broadcast for commissioning and emergency operation via button ON/OFF
- ECG addressing and checking in conjunction with the IP Master and the DALI-Web-Plugin
| Type designation | DALI-64B-2X |
| Article no. | 80027167 |
| Mains supply | 198-264V AC, 198-280V DC, 0/50-60 Hz |
| Current consumption | max. 95mA |
| Power consumption | max. 10.5W +/- 10% |
| Insulation voltage | 4000V ISYGLT, 1500V DALI / mains |
| Subnet (RS-485) | max. 5.6V limitation by Z-diodes |
| DALI interface | 2 separate DALI lines, output current max. 180mA per line |
| Connection | Screw terminals 0.25mm² to 1.5mm² |
| Operating temperature | -10°C to +50°C |
| Storage temperature | -25°C to +70°C |
| Humidity | 0-90% r.h. non-condensing |
| Protection class | IP 20 |
| Design | DIN rail-mounting plastic housing light grey, snap-on on 35mm DIN rail 6 HP |
| Dimensions | WxHxD 106x90x61mm |
| Weight | 220g |
| Make | ISYGLT |
| Conformity | CE |
Function Indicators (LEDs on the Module)
| Designation | Status | Colour | Meaning |
|---|---|---|---|
| Power | OFF | No operating voltage | |
| ON | red | Operating voltage, no error | |
| Flashing | red/green | Emergency/test mode is active, DIP switch 1=ON | |
| Flashing | red | BUS failure mode | |
| BUS / Notb.DA1 | OFF | No BUS detected, DIP switch 1=ON: emergency/test mode is active, button ON/OFF status DA1 OFF | |
| ON | yellow | Error BUS communication (address not detected) | |
| Flashing | yellow | Interference-free data transmission via the BUS line | |
| ON | green | DIP switch 1=ON: emergency/test mode is active, button ON/OFF status DA1 ON | |
| Notb.DA2 | OFF | DIP switch 1=ON: emergency/test mode is active, button ON/OFF status DA2 OFF | |
| ON | green | DIP switch 1=ON: emergency/test mode is active, button ON/OFF status DA2 ON |
Additional Equipment
- IP Master MA-IP-2
Variants
- DALI Module DALI-16B-2X
- DALI Module DALI-16B-2X-IP with 2 additional RJ45 network interfaces
- DALI Module DALI-64B-2X
- DALI Module DALI-64B-2X-IP with 2 additional RJ45 network interfaces
