Digital IN Module IN-02BW

Flush-mounted module for connecting 2 ISYGLT Motion Sensors BW-01 to the subnet.

Quick Facts

  • 2 inputs with BUS coupler for Motion Sensor BW-01

The flush-mounted module is used to connect up to 2 ISYGLT Motion Sensors BW-01 to the subnet.

Electrical Data

Operating voltage 12-27V DC
Current consumption 25mA
Inputs 2 connections for BW-01 or BW-04 (at 47kOhm)
Cable length to BW max. 20cm!!
Subnet (RS-485) max. 5.6V limitation by Z-diodes
Connection screw terminals 2.5mm² and 2 sockets 3-pole
Operating temperature -10°C to +50°C
Storage temperature -25°C to +70°C
Humidity 0...85 % r.h. non-condensing
Protection class IP 20

Design, Dimensions, Weight

Design encapsulated in yellow plastic cap for installation in commercially available flush-mounted boxes or third-party devices
Dimensions DxH 50x18mm
Weight approx. 90g

Ordering Data and Conformity

Type designation IN-02BW
Article no. 80024021
Make ISYGLT
Conformity CE

Tender Documents

Instruction Manuals

Wiring Diagrams

DIP switch

8-pole DIP switch for setting the ISYGLT BUS address (0-127) is located on the module.

Special function DIP switch 1

DIP-1 Setting
OFFData transmission rate 38400 Baud
ONData transmission rate 9600 Baud

Function Indicators (LEDs on the Module)

LEDDesignationStateMeaning
redPowerOffNo operating voltage
OnOperating voltage, no error
yellowBUSOffError BUS
blinkingInterference-free data transmission via the BUS line

Pin Assignment

4-pole connector

=Ub Operating voltage
0V 0V Operating voltage
A BUS A (subnet RS-485)
B BUS B (subnet RS-485)

3-pole connector

ge1 1st Motion Sensor yellow wire
ws1 1st Motion Sensor white wire
br1 1st Motion Sensor brown wire

3-pole connector

ge2 2nd Motion Sensor yellow wire
ws2 2nd Motion Sensor white wire
br2 2nd Motion Sensor brown wire