Combi Radio Receiver FUE-BW-LS

Attention! Discontinued type - no longer in production!

Combi Radio Receiver for up to 20 remote controls with integrated light sensor and motion detector.

Quick Facts

  • radio receiver
  • light sensor
  • motion detector
  • can distinguish between large/fast and fine movements

The FUE-BW-LS is a radio receiver to which up to 20 radio remote controls with up to 4 sub-addresses can be taught. In addition, a motion detector is integrated, which can distinguish between large/fast and fine movements. With the integrated light sensor, 2 daylight switching thresholds (mixed light) and a switching threshold linked from daylight (mixed light) and movement can be parameterised. The FUE-BW-LS works on the ISYGLT subnet. All functions can be evaluated and individually linked by free programming.

Light control sensor
The sensor is designed for indoor light measurement (mixed light measurement). 2 daylight switching thresholds (mixed light) as well as a switching threshold linked from daylight (mixed light) and movement can be parameterised.

Remote receiver
Defined functions are available via radio remote control. Furthermore, it is possible to evaluate all button codes of the FS-10T hand-held remote control in the Master.

Electrical Data

Operating voltage 12V to 30V DC
Current consumption max. 30mA
Carrier frequency Standard 433MHz
Range 75m, with visual contact transmitter and receiver
Connection 20cm cable with RJ10 plug (to sensor) and screw terminals 1.5mm² for BUS
Operating temperature -10°C to +50°C
Storage temperature -25°C to +70°C
Protection class IP 20

Design, Dimensions, Weight

Design plastic housing flush-mounted /surface-mounted white RAL9010
Dimensions DxH 120x50mm + lens (surface-mounted version)
Weight 195g

Ordering Data and Conformity

Type designation FUE-BW-LS
Article no. 80040205
Make ISYGLT
Conformity CE

Technical Drawings

Wiring Diagrams

Information on the detection zone


DIP switch

8-pole DIP switch for setting the ISYGLT BUS address (0-127) is located inside the module.


Log on FS-10T to FUE-BW-LS

Preparation of the FS-10T:

  • Set the turn switch on the remote control to position 3.
  • Press FUE button for 2 seconds - LED remains on
  • Press the green button on the remote control (previously set to sub-address 3) - receiver blinks for 2 sec. to confirm

To delete all remote controls, proceed as follows:

  • Press FUE button for 10 seconds - LED on receiver blinks 3x >> all deleted. The required remote controls can now be programmed.

We recommend deleting the remote control entries in the receiver when it is first used.

Button codes

ButtonAction when button is pressedButton code remote control
(sent code)
1When releasing the button press 50ms...5s1
When releasing the button press >5s2
Double click3
2When releasing the button press 50ms...5s4
When releasing the button press >5s5
Double click6
3When releasing the button press 50ms...5s7
When releasing the button press >5s8
Double click9
4When releasing the button press 50ms...5s10
When releasing the button press >5s11
Double click12
IDWhen releasing the button press 50ms...5s13
When releasing the button press >5s14
Double click15
ON/OFFWhen releasing the button press 50ms...5s16
When releasing the button press >5s17
Double click18
UPWhen releasing the button press 50ms...5s19
  
Double click21
DOWNWhen releasing the button press 50ms...5s22
  
Double click24
White + 1When releasing the button press 50ms...5s25
When releasing the button press >5s26
Double click27
White + 2When releasing the button press 50ms...5s28
When releasing the button press >5s29
Double click30
White + 3When releasing the button press 50ms...5s31
When releasing the button press >5s32
Double click33
White + 4When releasing the button press 50ms...5s34
When releasing the button press >5s35
Double click36
White + IDWhen releasing the button press 50ms...5s37
When releasing the button press >5s38
Double click39
White + ON/OFFWhen releasing the button press 50ms...5s40
When releasing the button press >5s41
Double click42
White + UPWhen releasing the button press 50ms...5s43
  
Double click45
White + DOWNWhen releasing the button press 50ms...5s46
  
Double click48
Blue + 1When releasing the button press 50ms...5s49
When releasing the button press >5s50
Double click51
Blue + 2When releasing the button press 50ms...5s52
When releasing the button press >5s53
Double click54
Blue + 3When releasing the button press 50ms...5s55
When releasing the button press >5s56
Double click57
Blue + 4When releasing the button press 50ms...5s58
When releasing the button press >5s59
Double click60
Blue + IDWhen releasing the button press 50ms...5s61
When releasing the button press >5s62
Double click63
Blue + ON/OFFWhen releasing the button press 50ms...5s64
When releasing the button press >5s65
Double click66
Blue + UPWhen releasing the button press 50ms...5s67
  
Double click69
Blue + DOWNWhen releasing the button press 50ms...5s70
  
Double click72
Blue + White + 1When releasing the button press 50ms...5s73
When releasing the button press >5s74
Double click75
Blue + White + 2When releasing the button press 50ms...5s76
When releasing the button press >5s77
Double click78
Blue + White + 3When releasing the button press 50ms...5s79
When releasing the button press >5s80
Double click81
Blue + White + 4When releasing the button press 50ms...5s82
When releasing the button press >5s83
Double click84
Blue + White + IDWhen releasing the button press 50ms...5s85
When releasing the button press >5s86
Double click87
Blue + White + ON/OFFWhen releasing the button press 50ms...5s88
When releasing the button press >5s89
Double click90
Blue + White + UPWhen releasing the button press 50ms...5s91
  
Double click93
Blue + White + DOWNWhen releasing the button press 50ms...5s94
  
Double click96
WhiteWhen releasing the button press 50ms...5s97
When releasing the button press >5s98
Double click99
BlueWhen releasing the button press 50ms...5s100
When releasing the button press >5s101
Double click102
 Motion detector small movement103
Motion detector large movement104
  

Function Indicators (LEDs on the Module)

LEDDesignationStateMeaning
redReceptionOnReceiving a radio command

Software


Parameterization with ProgramDesigner

In the ISYGLT ProgramDesigner you will find the following parameterization options:

  • Sensor data
  • Light threshold values
  • Light switch

Pin Assignment

4-pole plug

Ub Operating voltage
0V Operating voltage
A BUS A (Subnet RS-485)
B BUS B (Subnet RS-485)