The Mini Motion Sensor is suitable for many applications with motion detection between 2m and 10m. The BW-03 requires 24V and has an output that outputs the motion pulses. Optimum function is ensured by connection to a binary input of an I/O Module.
The ISYGLT BW-03 Motion Sensor is based on passive infrared monitoring technology. The very small round lens is used here to monitor 80 zones in a radial manner. It is used for presence and motion monitoring indoors.
The detection range is oval with an angle of 91° x 110°. The range is guaranteed over 10m.
Due to the integrated line amplifier, the length of the control line up to the I/O Module or 24V power component can be up to 100m.
Due to its small size, the Motion Sensor can be easily integrated into devices or lamps. We offer many different delivery variants, e.g. as a mini ceiling installation variant or in the switch range for flush-mounted installation.
| Operating voltage | 12V to 30V DC |
| Current consumption | max. 10mA without load |
| Output | Vin -1.5V, 200mA short-circuit proof PNP, max. 100m cable length to input module |
| Connection | spring-loaded terminal 3-pole 2x 0.25 - 0.75mm² each |
| Operating temperature | -10...+50°C |
| Storage temperature | -25...+70°C |
| Humidity | 0...85 % r.h. non-condensing |
| Protection class | IP20 |
Note 1: For reliable detection, the sensor must rise at least 5.6 mm from the mounting plate.
Note 2: Due to the design, a correspondingly deep drilling is sufficient for panel mounting.
Note 3: The height measurement does not include any residues of the shape cut.
| Type designation | Article no. | Description |
|---|---|---|
| BW-03-UP | 80087171 | For mounting in flush-mounted box; supplied in switch range |
| BW-03-SA | 80087172 | For wall mounting in flush-mounted box, e.g. above doors for optimised detection |
| BW-03-LP | 80087173 | Mini sensor for discreet installation in suspended ceiling |
| BW-03-LP-K4M | 80087173 | Like BW-03-LP, but with 4m connection cable |
Article no.: 80087170
The Mini Motion Sensor is suitable for many applications with motion detection between 2m and 10m. The BW-03 requires 24V and has an output which issues the motion pulses. Optimum function is guaranteed by connecting it to a binary input of an I/O module.
