I/O-08B-24V-1A
Article no.: 80021000
-
kostenlose Anfrage / free request
from 1 € 0.00 € 0.00
The I/O module I/O-08B-24V can be used to switch 8 circuits with a maximum of 24V/1A. 8 optocoupler inputs 12-48V (4 inputs each on a common counter potential) are available as inputs. The functions of all inputs and outputs are freely programmable via the software.
From production 2015, the modules will be available with the following parameterisable functions:
Operating voltage | 12V to 35V DC or 12V to 27V AC |
Current consumption |
12V DC = 180mA, 24V DC = 80mA, 35V DC = 55mA 12V AC = 105mA, 24V AC = 70mA, 27V AC = 65mA (all relays are energized) |
Inputs | 8x 12-48V AC/DC, input current per input 5mA at 24V |
Outputs | 8x max. 48V AC or 30V DC / 1A each output |
Subnet (RS-485) | max. 5.6V limitation by Z-diodes |
Connection | screw terminals 1.5mm², inputs and BUS pluggable, BUS connector |
Operating temperature | -10°C to +50°C |
Storage temperature | -25°C to +70°C |
Humidity | 0...85 % r.h. non-condensing |
Degree of protection | in not installed state IP30 |
8-pole DIP switch for setting the ISYGLT BUS address (0-127) is located under the cover of the module.
LED | Designation | State | Meaning |
---|---|---|---|
red | POWER | Off | No operating voltage |
On | Operating voltage, no error | ||
yellow | BUS | Off / On | Error BUS |
blinking | Interference-free data transmission via the BUS line | ||
8x green | A1-A8 | Off | Output inactive |
On | Output active |
Article no.: 80021000