Digital I/O Module I/O-04U-V2

Flush-mounting input module for connecting conventional pushbuttons and switches to the subnet. With this module, 4 commands can be transferred to the BUS system and 4 signals can be output.

Quick Facts

  • 4 digital outputs
  • 4 digital inputs
  • Connection of standard buttons, switches and potential-free contacts to the BUS

The flush-mounting I/O Module is used to connect illuminated pushbuttons to the subnet. The module can be used to transfer 4 commands to the BUS system and output 4 signals. The buttons and signal lamps are connected by means of push-in terminals.

Electrical Data

Operating voltage 12-27V DC
Current consumption 10-100mA depending on output load
Inputs +Ub -2V, 5mA via potential-free contact or 12-27V DC, line length max. 1m
Outputs +Ub -2V, max. 15mA via OC outputs, total 60mA
Subnet (RS-485) max. 5.6V limitation by Z-diodes
Connection screw terminals 1.5mm² for BUS, inputs/outputs via push-in terminals (wires max. 0.8mm)
Operating temperature -10°C to +50°C
Storage temperature -25°C to +70°C
Humidity 0-85 % r.h. non-condensing
Protection class IP 20

Design, Dimensions, Weight

Design White plastic housing for installation in commercially available flush-mounted boxes or third-party devices
Dimensions DxH 50x16mm
Weight approx. 23g

Ordering Data and Conformity

Type designation I/O-04U-V2
Article no. 80024002
Make ISYGLT
Conformity CE

Tender Documents

Instruction Manuals

Wiring Diagrams

DIP switches

8-pole DIP switch for setting the ISYGLT BUS address (0-127) is located on the module.

Special function DIP switch 1

DIP 1Setting
OFFWithout function

 

Function Indicators (LEDs on the Module)

LEDDesignationStateMeaning
yellowBUSONBUS signal is present, but address is not recognised
BlinkingInterference-free communication with the master via the subnet

Pin Assignment

4-pole connection

=Ub Operating voltage
0V 0V Operating voltage
A BUS A (Subnet RS-485)
B BUS B (Subnet RS-485)

10-pole push-in terminal

E1 Input 1
E2 Input 2
E3 Input 3
E4 Input 4
C+E COM. inputs (+Ub -2V)
A1 Output 1
A2 Output 2
A3 Output 3
A4 Output 4
C+A COM. outputs (+Ub -2V)
IO-04U-V2.jpg

I/O-04U-V2

Article no.: 80024002

Flush-mounting input module for connecting conventional pushbuttons and switches to the subnet. With this module 4 commands can be transferred to the BUS system.
+ shipping costs
  • kostenlose Anfrage / free request
    from 1 € 0.00 € 0.00

This website uses cookies

We use cookies to personalise content and ads, provide social media features and analyse traffic to our website. We also share information about your use of our website with our social media, advertising and analytics partners. Our partners may combine this information with other data that you have provided to them or that they have collected in the course of your use of the Services. You give consent to our cookies when you continue to use our website.

Cookie optin by Olli machts