| Operating voltage | 15V to 30V DC, Triac output 230V AC |
| Current consumption | max. 15mA at 24V |
| Inputs | 2x 24V DC, input current per input 5mA at 24V |
| Outputs | 1x triac 230V AC 3A (700W),"zero crossing circuit" |
| Subnet (RS-485) | max. 5.6V limitation by Z-diodes |
| Connection 230V | Push-in connection 2x 0,2 - 2.5mm² |
| Connection BUS | Push-in connection 2x 0.12 - 0.5mm² |
| Operating temperature | -10°C to +50°C |
| Storage temperature | -25°C to +70°C |
| Humidity | 0...85 % r.h. non-condensing |
| Protection | in not installed state IP20 |
10-pole DIP switch for setting the ISYGLT BUS address (0-127) is located on the side of the module. DIP switch 1 - 3 are not addressed at this module and remain OFF. DIP switches 4 to 10 are used for the ISYGLT address.
| LED | Designation | State | Meaning |
|---|---|---|---|
| yellow | BUS | Off | Error BUS - no activity |
| On | ISYGLT-BUS signal detected, but no valid address | ||
| blinking | Interference-free data transmission via the BUS line |
Article no.: 80020210
